Hitechadhesives.com
About Us
Products
Clients
Assembly Solutions
 
Threadlocking
 
Thread Sealing
 
Gasketing
 
Retaining
 
General Purpose Bonding
 
Structural Bonding
 
Addition Products
Maintenance Solutions
Pre - Applied
Contact Us
 
Distributors for Henkel Products High Quality Engineering Adhesives and Sealants, RTV Silicons. Moly Graph, Pidilite.Insulative Varnishes, CCPPI Self Adhesives / Insulated Tapes

 

 
 
 

Retaining

SECURING CYLINDRICAL ASSEMBLIES
  • Bond non-threaded cylindrical metal assemblies
  • High and moderate strength products - can cary high loads and eliminate fretting.
  • Fill all voids - prevent corrosion
  • Reduce the need for close tolerances
  • 100% Contact - load and stress is distributed evenly over the joint
 
Loctite 609
General Purpose Retaining Compound


Recommended for parts that will need subsequent dismantling, i.e. retenion of bearings onto shafts and into housings. Mil-Spec
(R-46082B) Type I.

Loctite 638
Gives best best resistance to dynamic, axial & radial loads. Recommended for retaining shafts, gears, Pulleys & similar, cylindrical parts. P1 NSF Reg. No. 123010
   
 
SOLUTON
660
Quick Metal
641
Strength Required High Moderate
Shear Strength, psi (N/mm2) 3300 (23) 1700 (11.5)
Diametrical Clearance Upto .020" (0.5mm) Upto .005" (0.1 mm)
Temperature Resistance 300°F (150°C) 300°F (150°C)
Availalble Sizes 50 ml 50 ml, 250ml
 
 
SOLUTON
609
648
Strength Required Moderate / High High
Shear Strength, psi (N/mm2) 2300 (15.8) 3900 (26.5)
Diametrical Clearance Upto .005" (0.1mm) Up to .006" (0.15 mm)
Temperature Resistance 300°F (150°C) 347°F (175°C)
Availalble Sizes 50 ml, 250 ml 50 ml, 250ml
 
SOLUTON
638
Strength Required High
Shear Strength, psi (N/mm2) 4500 (31)
Diametrical Clearance Upto .005" (0.1mm)
Temperature Resistance 300°F (150°C)
Availalble Sizes 50 ml, 250 ml
   
 
ADDIIONAL PRODUCTS
NAME
TYPE
Loctite 620 High temperature (200°C), high viscosity retaining compound. Max gap fill of 0.015" (0.4mm)
Loctite 603
(Improved 601)
Excellent oil tolerance. For retaining close fitting cylindrical path (up to 0.005" / 0.1 mm gap)
Loctite 660
Used for repairing worn coaxial parts without remachining; enables re-use of worn bearing seats, keys, splines, tapers, or for retaining shims.
 
 

USE Loctite 7649 Primer N to:
  1. Activate inactive surfaces
  2. Speed cure times for faster return to service
  3. Speed curing through larger gaps and deep threads.
  4. Substantially speed cure times on cold parts.
  5. Act as a cleaning agent.


Cleaning agents


Primer is optional with:
Active surfaces: Brass, copper, bronze, iron, soft steel, nickel.

Primer is required with:
Inactive surfaces : Aluminium, stainless steel, magnesium, zinc, black oxide, cadmium, titanium, others.

 
 
 
ss
 
 
 
Home        About Us       Products        Clients        Contact Us